|
 |
|
Pelosi-Avellanet Cannulas: Stainless Steel, Quick Screw QS), Vented, Bullet Tip
|
|
| |
Item # 10003 25cm 2.5mm
Item # 10004 25cm 3.0mm
Item # 10005 25cm 4.0mm
Item # 10006 15cm 3.0mm
The ports are located on the sides and the bottom. They are no ports on the top to
avoid trauma of the subdermis, dermis, and skin. To assist the surgeon in orientation,
the cannula vent is aligned with the top, port-less part of the cannula.
|
|
| |
|
|
| |
|
|
|
| |
 |
|
Saylan Cannula: Stainless Steel, Quick Screw (QS), Vented
|
|
| |
Item # 10025
Saylan Style 15cm 2.5mm
The ports are located on the sides and the bottom.
There are no ports on the top to avoid trauma of the subdermis, dermis, and skin. Highly recommended to be used in conjunction with Pelosi-Avellanet 15cm 3.0mm cannulas for chin, neck, jaws, small areas and touch-ups.
|
|
| |
|
|
| |
|
|
|
| |
 |
|
Spiral Cannula: Stainless Steel, Quick Screw (QS), Vented
|
|
| |
Item # 10008 25cm 3.0mm
Item # 10009 25cm 4.0mm
Highly recommended for use during atraumatic,
large-volume, fat harvesting (>250ml) and in conjunction with Pelosi-Avellanet cannulas for the Liposculpturing phase of the surgery.
|
|
| |
|
|
| |
|
|
|
| |
 |
|
Pelosi Disruptor: Stainless Steel, Quick Screw (QS), Vented
|
|
| |
Item # 10027 15cm 2.5mm
Item # 10029 25cm 4.0mm
Item # 10138 25cm 3.0mm
Pre-liposuction disruption maximizes liposuction efficiency by more than 50% without causing additional trauma to blood vessels, nerves, lymphatics, and connective tissue. |
|
| |
|
|
| |
|
|
|
| |
 |
|
Pelosi Small Area Liposuction Set, Stainless Steel, Slim Quick Screw (SQS), Vented |
|
| |
Item # 10027
Disruptor Cannula 2.5mm 15cm
Item # 10006
Pelosi-Avellanet Cannula 3.0mm 15cm
Item # 10025
Saylan Cannula 2.5mm 15cm
Item # 10118
Slim Quick Screw Handle
|
|
| |
|
|
| |
|
|
|
| |
 |
|
Abdominal Etching Cannulas
|
|
| |
Item # 10166 Style 16cm 3.0mm
Item # 10209 Style 23cm 3.0mm
Ideal for high definition liposculpturing (such as abdominal “six-pack”)
|
|
| |
|
|
| |
|
|
|
| |
 |
|
Pelosi Duetto Handles for QS Cannula and Disruptor
|
|
| |
Item # 10030
(A) Handle for QS suction cannulas
Item # 10031
(B) Handle for QS Pelosi disruptors
Using detachable handles allows the use of autoclaves with short-depth inner chambers for sterilizing the cannulas. Diameter at widest part of shaft: 1 ¼.” Autoclavable.
|
|
| |
|
|
| |
|
|
|
| |
 |
|
Slim Handle for SQS Cannulas and Disruptors
|
|
| |
Item # 10118
Ideal for use with shorter (15cm) cannulas and disruptors. Diameter of shaft: 5/8”
|
|
| |
|
|
| |
|
|
|
| |
 |
|
Biplane Adjustable Handle for Luer Lock Cannulas
|
|
| |
Item # 10102
Reduces fatigue and repetitive motion stress. Requires 30% less energy than traditional handles. Adjust the Luer Lock tip to position and lock the cannula. The special
patented Luer allows the operator to adjust the cannula with the holes away from the
skin, thereby avoiding the possibility of dermis damage. All other Luer handles with a standard Luer end do not allow such adjustment.
|
|
| |
|
|
| |
|
|
|
| |
|
|
|
